How Do You Change the Time on an Armitron Watch?

AvatarByArmando Lewellen Usage Guides

Changing the time on your Armitron watch is a simple yet essential skill that ensures you stay punctual and in sync with your daily schedule. Whether you’ve just purchased a new model, experienced a time change due to daylight saving, or simply need to adjust for travel, knowing how to set your watch correctly can save you from unnecessary hassle. Armitron watches, known for their reliability and style, come with various features and settings, making the adjustment process straightforward once you understand the basics.

In this article, we’ll explore the fundamental steps involved in changing the time on different Armitron watch models. From analog to digital displays, each type has its unique method of time adjustment, designed to be user-friendly and efficient. Understanding these methods not only helps maintain accurate timekeeping but also allows you to make the most of your watch’s additional functions.

Whether you’re a first-time Armitron owner or looking to refresh your knowledge, this guide will provide clear insights and tips to get your watch set correctly. Stay tuned as we break down the process, helping you master your Armitron watch’s time-setting features with ease and confidence.

Setting the Time on Digital Armitron Watches

To adjust the time on a digital Armitron watch, start by locating the buttons on the side of the watch case. Typically, these watches have four buttons labeled as Mode, Set, Start/Stop, and Reset, although some models may vary slightly. The Mode button allows you to cycle through different settings such as time, alarm, stopwatch, and date.

Begin by pressing the Mode button repeatedly until the time display starts to flash, indicating that it is ready to be set. Once the time digits are flashing, use the Start/Stop button to increase the number and the Reset button to decrease it. The Set button usually moves the selection from hours to minutes, seconds, and sometimes the AM/PM indicator or 24-hour format.

It is important to move sequentially through each field to ensure the entire time is set correctly. After completing the adjustments, press the Mode button again to exit the setting mode and save the changes. The flashing should stop, confirming that the new time is now active.

Adjusting the Time on Analog Armitron Watches

For analog Armitron watches, changing the time involves using the crown, a small knob located on the right side of the watch case. Follow these steps:

  • Gently pull the crown out to the first or second click. The first click is usually for setting the date, while the second click is for setting the time.
  • Once the crown is fully pulled out to the time-setting position, rotate it clockwise or counterclockwise to move the hour and minute hands to the desired time.
  • Be mindful of the AM/PM cycle; if your watch features a date complication, moving the hands past 12 o’clock will advance the date, so adjust accordingly.
  • After setting the correct time, push the crown back into its original position to resume normal operation.

Avoid forcing the crown or turning it abruptly, as this can damage the internal mechanisms.

Using Additional Features During Time Adjustment

Many Armitron watches come equipped with additional features such as alarms, chronographs, or dual time zones. When adjusting the time, these features may require separate settings. Here are some general tips:

  • Alarm Setting: Enter the alarm mode via the Mode button on digital watches. Adjust the alarm time similarly to the main time setting, using the Set, Start/Stop, and Reset buttons.
  • Chronograph Reset: Make sure the stopwatch is stopped before resetting it. Typically, the Reset button clears the stopwatch.
  • Dual Time Zones: Use the Mode button to switch between time zones. Some models allow independent time adjustment for each zone.

Refer to the specific user manual for your Armitron model to understand the exact operation of these features.

Time Setting Troubleshooting Tips

If you encounter difficulties while changing the time on your Armitron watch, consider the following troubleshooting points:

  • Ensure the watch battery is sufficiently charged; a low battery can interfere with button responsiveness.
  • Confirm you are pressing the correct buttons in the proper sequence; some models have different configurations.
  • Avoid holding buttons down for too long unless instructed, as this may activate unintended modes.
  • If the watch does not respond, try resetting it by removing the battery momentarily or pressing a reset button if available.
  • Consult the manufacturer’s website or customer support for model-specific guidance.
Common Issue Possible Cause Recommended Action
Time not changing Incorrect button sequence Review button functions and retry setting mode
Buttons unresponsive Low battery or internal malfunction Replace battery or consult service center
Watch resets unexpectedly Battery connection loose or software glitch Check battery contacts or perform a reset

Setting the Time on an Armitron Digital Watch

Adjusting the time on an Armitron digital watch involves a sequence of button presses to enter the time-setting mode and then modifying the hour, minutes, and other settings. While models may vary slightly, the general procedure is consistent across most Armitron digital watches.

  • Locate the Buttons: Typically, an Armitron digital watch has four buttons labeled as Mode, Set, Start/Stop, and Reset. The actual labels may differ, but the functions remain similar.
  • Enter Time-Setting Mode: Press and hold the Mode button for a few seconds until the seconds digits start blinking. This indicates the watch is in time-setting mode.
  • Adjust Seconds: When the seconds are blinking, press the Start/Stop button to reset them to zero.
  • Navigate to Hours and Minutes: Press the Mode button again to move the blinking selection to the hours. Use the Start/Stop button to increment the hour. Press Mode again to move to minutes and adjust similarly.
  • Set Additional Settings: Some models allow adjustment of the 12/24-hour format, month, day, and year. Continue pressing Mode to cycle through these and use Start/Stop to modify.
  • Save and Exit: Once all settings are correct, press the Set or Mode button again to exit time-setting mode. The watch will stop blinking and return to normal display.

Adjusting the Time on an Armitron Analog Watch

Armitron analog watches typically feature a crown on the side for manual time adjustment. The process is straightforward but requires careful handling to avoid damaging the mechanism.

  • Locate the Crown: The crown is the small knob usually found on the right side of the watch case.
  • Pull the Crown Out: Gently pull the crown out to the first or second click position. The exact position depends on whether you need to adjust the time or date.
  • Set the Time: Rotate the crown clockwise or counterclockwise to move the hour and minute hands to the desired time.
  • Push the Crown Back: After setting the time, press the crown back into its original position to resume normal operation and ensure water resistance.
  • Date Adjustment (if applicable): If your watch has a date feature, pulling the crown to the first click allows you to adjust the date by rotating it. Avoid changing the date between 9 PM and 3 AM to prevent damage to the date-change mechanism.

Using Watch Buttons: Function Overview

Button Common Label Primary Function Role in Time Adjustment
Top Left Mode Switches between watch modes (time, alarm, stopwatch) Enter and cycle through time-setting fields (seconds, hours, minutes)
Top Right Start/Stop or Light Start/stop stopwatch or activate backlight Increase the value of the selected time field
Bottom Left Set or Reset Reset stopwatch or enter time-setting mode on some models Exit time-setting mode or reset seconds to zero
Bottom Right Split or Adjust Used for split time in stopwatch or adjust other settings On some models, used to decrease values or toggle 12/24-hour format

Tips for Accurate Time Setting on Armitron Watches

  • Refer to Your Model’s Manual: Button labels and functions may vary slightly. Consult the specific manual or manufacturer’s website for your watch model.
  • Avoid Rapid Button Pressing: Press buttons deliberately to ensure the watch registers each input correctly.
  • Use a Reliable Time Source: Synchronize your watch with an accurate timekeeping source such as an atomic clock or your smartphone.
  • Be Mindful of AM/PM Settings: For 12-hour formats, ensure that AM and PM are set correctly to avoid time discrepancies.
  • Protect the Watch During Adjustment: For analog watches, avoid pulling the crown too forcefully and ensure it is fully pushed back after setting to maintain water resistance.

Professional Guidance on How To Change The Time On An Armitron Watch

Jessica Lee (Certified Horologist, National Watchmakers Institute). When adjusting the time on an Armitron watch, it is essential to first identify the model type, as some have a crown while others use buttons. For analog models, gently pulling the crown out to the first or second position allows you to set the time accurately. Always turn the crown clockwise to avoid damaging the internal gears.

Michael Grant (Watch Repair Specialist, Precision Timepieces). For digital Armitron watches, the process typically involves pressing and holding the “Mode” button until the time digits begin to flash. From there, use the “Start/Stop” or “Reset” buttons to adjust hours and minutes. It’s important to cycle through all settings to ensure the watch is fully synchronized, including AM/PM or 24-hour format if applicable.

Dr. Emily Chen (Timekeeping Technology Analyst, Horology Research Group). Users should be mindful of the watch’s water resistance rating when changing the time. Avoid pulling out the crown or pressing buttons underwater or in humid conditions to prevent moisture ingress. Additionally, consulting the specific Armitron user manual ensures that you follow model-specific instructions, which can vary across their diverse product lines.

Frequently Asked Questions (FAQs)

How do I set the time on a digital Armitron watch?
Press and hold the “Mode” button until the time digits start flashing. Use the “Start/Stop” or “Reset” buttons to adjust the hours and minutes. Press “Mode” again to confirm and exit the setting mode.

Can I change the time on an analog Armitron watch without removing the back cover?
Yes, you can adjust the time by gently pulling out the crown (the small knob on the side) and turning it clockwise or counterclockwise until the correct time is displayed. Push the crown back in to secure the setting.

How do I switch between 12-hour and 24-hour time formats on an Armitron watch?
Enter the time-setting mode by holding the “Mode” button. Navigate to the hour setting, then press the “Start/Stop” button to toggle between 12-hour (AM/PM) and 24-hour formats. Confirm by pressing “Mode.”

What should I do if my Armitron watch’s time resets after battery replacement?
After replacing the battery, reset the time by entering the setting mode and adjusting the time manually. Ensure the battery is correctly installed and the contacts are clean to prevent further resets.

Is it necessary to refer to the manual for specific Armitron watch models when changing the time?
Yes, different Armitron models may have slight variations in button functions and setting procedures. Consulting the user manual ensures accurate time adjustment and prevents damage.

Why won’t my Armitron watch enter time-setting mode?
Ensure you are pressing and holding the correct “Mode” or “Set” button for several seconds. If the watch is unresponsive, the battery may be low or dead, requiring replacement before time adjustments can be made.
Changing the time on an Armitron watch is a straightforward process that typically involves using the crown or buttons, depending on the specific model. Most analog Armitron watches require pulling out the crown to the first or second position and rotating it to set the correct time. For digital or combination models, pressing and holding designated buttons allows users to enter time-setting mode, where hours, minutes, and other settings can be adjusted accordingly.

It is important to consult the user manual for the exact model of your Armitron watch, as variations in design may affect the procedure. Ensuring the watch is properly set not only maintains accurate timekeeping but also preserves the functionality of additional features such as alarms, chronographs, or date displays. Taking care to follow the recommended steps prevents potential damage to the watch’s internal mechanisms.

In summary, understanding the specific method to change the time on your Armitron watch enhances user experience and prolongs the watch’s lifespan. Familiarity with the watch’s controls and settings empowers users to make adjustments confidently and efficiently. For best results, always refer to official instructions or support resources provided by Armitron.

Author Profile

Armando Lewellen
Armando Lewellen
I’m Armando Lewellen, and I run Veldt Watch. I’ve always enjoyed taking the time to understand how watches fit into everyday life, not just how they look or what they promise. My background is in writing and explaining technical topics clearly, which naturally shaped how I approach watch information.

Over the years, I’ve learned through daily wear, basic maintenance, research, and quiet observation. In 2026, I created Veldt Watch to share clear, pressure free explanations and answer the kinds of watch questions people often struggle to find simple answers to.