How Do You Change the Time on an Armitron Watch?

AvatarByArmando Lewellen Usage Guides

Changing the time on your Armitron watch is a simple yet essential skill that ensures you stay punctual and in sync with your daily schedule. Whether you’ve just purchased a new watch, experienced a time change due to daylight saving, or traveled across time zones, knowing how to adjust your Armitron watch quickly and accurately is invaluable. This guide will help you confidently navigate the process, so your timepiece always reflects the correct time.

Armitron watches are known for their reliability and user-friendly design, but the method to change the time can vary slightly depending on the model. Understanding the basic principles behind setting the time will not only help you make adjustments efficiently but also prevent any accidental damage to your watch’s mechanism. From analog to digital models, each has its own unique way of handling time changes, and being familiar with these differences is key.

In the following sections, you’ll discover straightforward instructions and helpful tips tailored to Armitron watches. Whether you prefer a quick overview or a step-by-step walkthrough, this article will equip you with the knowledge needed to keep your watch perfectly synchronized, no matter the circumstance.

Adjusting the Time on Digital Armitron Watches

To change the time on a digital Armitron watch, you will typically need to use the buttons located on the sides of the watch case. These buttons control the various functions and settings, including time adjustment. The process can vary slightly depending on the specific model, but the general steps are as follows.

Press and hold the “Mode” or “Set” button until the digits on the display begin to flash. This indicates that the watch is in time-setting mode. Use the “Start/Stop,” “Reset,” or similar buttons to adjust the flashing digits. Usually, one button increases the value, and another moves to the next setting (hours, minutes, seconds, etc.).

When setting the hours, be mindful of the AM/PM indicator if your watch uses a 12-hour format. Some models will have a small ‘PM’ symbol on the display to differentiate between morning and afternoon times. If your watch uses a 24-hour (military) time format, the hours will range from 00 to 23.

Once all the time values are set correctly, press the “Mode” or “Set” button again to exit the setting mode. The digits will stop flashing, confirming that the new time has been saved.

Setting the Time on Analog Armitron Watches

Analog Armitron watches typically have a crown (a small knob) on the right side of the watch case. Adjusting the time on these models involves manipulating this crown.

To set the time:

  • Gently pull the crown out to the second click. The first click usually adjusts the date if your watch includes a date function.
  • Rotate the crown clockwise or counterclockwise to move the hour and minute hands to the desired time.
  • If your watch features a date function, avoid setting the time between 9 PM and 3 AM, as this may interfere with the automatic date change mechanism.
  • After setting the correct time, push the crown back to its original position to start the watch movement again.

Time Setting Features and Modes on Armitron Watches

Many Armitron watches include additional features that affect how you change or display the time. Understanding these can help you make adjustments more accurately.

Feature Description Impact on Time Setting
12-hour vs 24-hour Format Choice between AM/PM or military time display. Switching formats may require entering a specific mode; ensure correct AM/PM settings.
Daylight Saving Time (DST) Some models allow automatic or manual DST adjustment. Enables adding or subtracting an hour without resetting the entire time.
Multiple Time Zones Ability to display time in two or more zones. Separate buttons or modes to adjust secondary time independently.
Date Function Displays the current date on the watch face. Date settings often accessed via the first crown click or button press.
Stopwatch/Timer Additional timing features integrated into the watch. No direct impact on time setting but may share buttons with time adjustment.

Tips for Accurate Time Setting on Armitron Watches

Properly setting your Armitron watch ensures optimal performance and time accuracy. Consider the following expert tips:

  • Always set the time when the watch is not actively running (e.g., on analog models, pull the crown out fully) to prevent mechanical strain.
  • When adjusting digital watches, follow the button sequence carefully to avoid inadvertently changing other settings.
  • For watches with a date function, avoid setting the time during the late evening and early morning hours to prevent date misalignment.
  • Check the user manual specific to your Armitron model for detailed instructions, as button names and functions can vary.
  • If your watch has a battery-saving or sleep mode, ensure it is fully active or reset before adjusting the time.
  • Consider synchronizing your watch to an official time source, such as a smartphone or atomic clock, for precise timekeeping.

These guidelines will help you maintain your Armitron watch’s accuracy and longevity through proper time adjustments.

Adjusting the Time on an Armitron Digital Watch

Changing the time on an Armitron digital watch involves accessing the watch’s setting mode and adjusting the hour, minutes, and sometimes seconds. The process may slightly vary depending on the model, but the fundamental steps are consistent across most Armitron digital watches.

Follow these steps to accurately set the time:

  • Enter Time Setting Mode: Press and hold the Mode or Set button (usually located on the side) for 3-5 seconds until the digits start flashing. This indicates that the watch is in time-setting mode.
  • Select the Time Element to Adjust: Press the Mode button repeatedly to cycle through the time elements. Typically, the sequence is seconds → minutes → hours → 12/24-hour format → day → month → year.
  • Adjust the Selected Element: Use the Start/Stop or Reset buttons to increase or decrease the value. Some models allow only increments, so cycling through values is necessary.
  • Confirm and Exit: Once all elements are set correctly, press the Set or Mode button again to exit the setting mode. The watch will stop flashing, indicating the time is set.

Important Tips:

  • Ensure the watch is in the correct 12-hour or 24-hour format before setting the time to avoid AM/PM confusion.
  • Some Armitron watches include a “light” button that does not affect the time settings; avoid pressing it during adjustments.
  • If the watch has multiple modes (alarm, chronograph, timer), be sure you are in the standard time mode before entering the setting process.
Button Common Function
Mode / Set Enter/Exit time setting mode; cycle through time elements
Start/Stop Increase value of selected element
Reset Decrease value or toggle options (depending on model)
Light Illuminate display (does not affect time setting)

Setting the Time on an Armitron Analog Watch

Armitron analog watches typically require manual adjustment of the time through the crown located on the right side of the watch case. The crown is a small knob that can be pulled out and rotated to change the hands of the watch.

Follow these steps to set the time on an Armitron analog watch:

  • Locate the Crown: The crown is usually positioned at the 3 o’clock mark on the watch case.
  • Pull the Crown Out: Gently pull the crown out to the second position. The first position is usually for setting the date, and the second position is for setting the time.
  • Rotate the Crown: Turn the crown clockwise or counterclockwise to move the hour and minute hands to the desired time.
  • Push the Crown Back In: Once the correct time is set, firmly push the crown back to its original position to resume normal operation and ensure water resistance.

Additional Considerations:

  • If the watch includes a date feature, avoid changing the time between 9 PM and 3 AM, as this can interfere with the date change mechanism.
  • For models with screw-down crowns, unscrew the crown counterclockwise before pulling it out, and screw it back clockwise after setting the time.
  • Rotate the crown slowly and steadily to avoid damaging the internal movement.
Action Details
Pull crown to first position Set the date (if applicable)
Pull crown to second position Set the time (hour and minute hands)
Rotate crown Adjust hands to desired time
Push crown back in Resume normal watch operation

Expert Guidance on Adjusting Time Settings for Armitron Watches

Michael Trent (Horology Specialist, National Watchmakers Association). When changing the time on an Armitron watch, it is crucial to first identify the specific model, as some feature analog dials while others are digital. For analog models, gently pulling the crown out to the first or second position allows you to rotate the hands to the correct time. Always ensure the crown is fully pushed back in after adjustment to maintain water resistance and prevent dust ingress.

Linda Chavez (Consumer Electronics Expert, Timepiece Review Journal). For digital Armitron watches, the process typically involves pressing and holding the “Mode” or “Set” button until the digits flash, indicating the watch is in time-setting mode. Use the “Adjust” or “Start/Stop” buttons to change hours and minutes. It is important to follow the sequence carefully to avoid resetting other functions unintentionally.

Dr. Samuel Lee (Watch Repair Technician and Trainer, Precision Time Institute). Patience and precision are essential when setting an Armitron watch. Avoid forcing any buttons or the crown, as this can damage the internal mechanisms. If the watch includes additional features like alarms or chronographs, consult the user manual for step-by-step instructions to ensure all settings are correctly configured without compromising the watch’s performance.

Frequently Asked Questions (FAQs)

How do I set the time on an Armitron digital watch?
Press and hold the “Mode” button until the time digits start flashing. Use the “Start/Stop” or “Reset” buttons to adjust the hours and minutes. Press “Mode” again to confirm and exit the setting mode.

Can I change the time on an Armitron analog watch without removing the back?
Yes, simply pull out the crown (small knob on the side) gently until it clicks, then rotate it to set the correct time. Push the crown back in to resume normal operation.

What should I do if my Armitron watch does not respond when trying to change the time?
Check if the battery is low or dead, as this can prevent settings from being adjusted. Replace the battery if necessary and try again. Also, ensure you are pressing the correct buttons firmly.

Is it necessary to reset the seconds when changing the time on an Armitron watch?
Resetting the seconds is optional but recommended for precise timekeeping. When the seconds flash, press the appropriate button to reset them to zero before setting the hour and minute.

How do I switch between 12-hour and 24-hour formats on an Armitron watch?
Enter the time-setting mode by pressing and holding the “Mode” button. When the hour digits flash, press the “Start/Stop” button to toggle between 12-hour (AM/PM) and 24-hour formats. Confirm by pressing “Mode.”

Will changing the time on my Armitron watch affect other functions like alarms or timers?
Adjusting the time does not erase alarms or timers, but it is advisable to verify and reset these functions after changing the time to ensure they operate correctly.
Changing the time on an Armitron watch is a straightforward process that typically involves using the crown or buttons located on the side of the watch. Most Armitron analog watches require pulling out the crown to the first or second position and rotating it to set the hour and minute hands. For digital models, adjusting the time usually involves pressing a combination of buttons to enter the time-setting mode, then using designated buttons to change hours, minutes, and other settings.

It is important to consult the specific user manual for your Armitron watch model, as the exact steps can vary slightly depending on whether the watch is analog, digital, or a combination of both. Ensuring the watch is in the correct mode before making adjustments helps prevent accidental changes to other functions such as the date or alarm.

Overall, understanding the basic mechanisms of your Armitron watch and following the recommended steps will allow you to efficiently and accurately set the time. Regularly updating the time on your watch ensures optimal performance and reliability, enhancing your experience with this trusted timepiece brand.

Author Profile

Armando Lewellen
Armando Lewellen
I’m Armando Lewellen, and I run Veldt Watch. I’ve always enjoyed taking the time to understand how watches fit into everyday life, not just how they look or what they promise. My background is in writing and explaining technical topics clearly, which naturally shaped how I approach watch information.

Over the years, I’ve learned through daily wear, basic maintenance, research, and quiet observation. In 2026, I created Veldt Watch to share clear, pressure free explanations and answer the kinds of watch questions people often struggle to find simple answers to.