How Do You Change the Battery in an Invicta Watch?

AvatarByArmando Lewellen Usage Guides

Changing the battery in your Invicta watch is a simple yet essential maintenance task that ensures your timepiece continues to function accurately and reliably. Whether your watch has stopped ticking or is showing signs of a weak battery, knowing how to replace it yourself can save you time and money while giving you a greater appreciation for your watch’s craftsmanship. With a few basic tools and some careful steps, you can breathe new life into your favorite Invicta watch without needing to visit a professional.

Understanding the process of changing an Invicta watch battery involves more than just swapping out the old cell. It requires familiarity with the watch’s design, the right equipment, and a gentle touch to avoid damaging delicate components. Many watch enthusiasts find that learning this skill not only empowers them but also deepens their connection to their timepiece. From identifying the correct battery type to safely opening the case back, each step plays a crucial role in maintaining your watch’s performance.

In the following sections, we will explore the key considerations and general overview of replacing an Invicta watch battery. Whether you own a classic model or a more modern design, this guide will prepare you with the knowledge needed to approach the task confidently and with care. Get ready to take control of your watch’s upkeep and keep it running

Removing the Watch Back

To access the battery compartment of an Invicta watch, you must first carefully remove the watch back. Invicta watches commonly feature either a screw-down case back or a snap-off case back, and the removal method will depend on the specific model.

For a screw-down case back, use a watch case opener tool designed to fit the notches on the back. Place the watch face down on a soft cloth to avoid scratches, align the tool with the indentations, and turn counterclockwise to unscrew. In contrast, a snap-off case back requires a thin, flat blade or a case knife. Gently insert the blade into the small gap between the case back and the watch case, applying minimal pressure to pry the back off without damaging the case.

It is crucial to work in a clean, well-lit environment to prevent dust or debris from entering the watch. Additionally, avoid using excessive force to prevent deformation of the watch case or damage to the sealing gasket.

Identifying and Removing the Old Battery

Once the back is removed, you will see the watch’s internal mechanism and the battery itself. The battery is typically secured by a small clip or retaining bar. Before proceeding, note the battery’s orientation to ensure correct placement of the new battery.

To remove the battery safely:

  • Use plastic or non-metal tweezers to avoid short-circuiting the battery or damaging components.
  • Gently lift or slide the retaining clip aside to free the battery.
  • Carefully extract the battery, noting its size and type.

If the retaining clip is screwed in place, use an appropriately sized screwdriver to remove the screw first, keeping it safe for reassembly.

Selecting the Correct Replacement Battery

Invicta watches use various battery types depending on the model and movement. Using the correct battery type is essential to maintain proper function and avoid damage.

Common battery types for Invicta watches include silver oxide cells such as SR626SW, SR920SW, or SR916SW. Lithium coin cells may also be used in some models. Always verify the battery number printed on the existing battery or consult the watch manual.

Battery Model Diameter (mm) Height (mm) Nominal Voltage Common Invicta Use
SR626SW 6.8 2.6 1.55 V Standard quartz movements
SR920SW 9.5 2.1 1.55 V Chronograph and larger models
SR916SW 9.5 1.6 1.55 V Slim profile watches
CR2032 20.0 3.2 3 V Some digital or hybrid models

Installing the New Battery and Reassembling

After selecting the correct replacement battery, place it in the battery compartment in the same orientation as the original. Ensure it sits flat and makes full contact with the terminals.

  • If applicable, replace or reposition the retaining clip or screw it back carefully.
  • Before sealing the watch back, check the watch’s functionality by observing the second hand or digital display.
  • Inspect the gasket (rubber seal) around the case back for any damage or debris; this is critical for water resistance. Replace the gasket if necessary.
  • Align the case back properly and press or screw it back into place securely. For screw-down backs, tighten evenly to maintain water resistance.

Following these steps will help ensure your Invicta watch remains functional and protected after a battery replacement.

Preparing to Change the Battery in Your Invicta Watch

Before beginning the battery replacement process, ensure you have the correct tools and a suitable workspace to avoid damaging your Invicta watch. The following steps outline the preparation phase:

  • Gather necessary tools: A watch case opener (case wrench or knife), precision screwdriver set, plastic tweezers, and a new battery compatible with your Invicta model.
  • Work in a clean, well-lit area: A flat surface with adequate lighting helps prevent losing small components and allows clear visibility.
  • Identify the battery type: Check the current battery for its model number, typically engraved on its surface, to ensure you purchase the correct replacement.
  • Wear protective gloves or finger cots: This avoids oils and dirt from your skin contaminating the watch’s internal components.

Accessing the Case Back of the Invicta Watch

Invicta watches typically have either a screw-down or snap-on case back. Correctly opening the case back is essential to avoid damage:

Case Back Type Identification Method to Open Tools Required
Screw-Down Visible notches or grooves around the perimeter Rotate counterclockwise to unscrew Case wrench or adjustable case opener
Snap-On Flat back with a small lip or indentation Insert case knife and gently pry open Case knife or thin blade
  • Secure the watch face down on a soft cloth to prevent scratches.
  • If the case back is screw-down, align the case wrench with the notches and turn slowly counterclockwise.
  • For snap-on backs, carefully insert the case knife into the indentation and gently twist to pop the back open.
  • Apply minimal force to avoid deforming the case or damaging the gasket.

Removing the Old Battery Safely

Once the case back is removed, proceed carefully to extract the old battery without harming the movement or other components:

  • Locate the battery compartment, usually secured by a small retaining clip or cover.
  • Use a precision screwdriver to gently loosen any screws holding the battery in place.
  • Employ plastic tweezers to lift the battery from its slot, avoiding contact with metal tools to prevent short circuits.
  • Note the battery’s orientation (positive and negative sides) to install the new one correctly.
  • Inspect the battery compartment and surrounding area for dust or corrosion; clean with a soft brush if necessary.

Installing the New Battery and Reassembling the Watch

Proper installation ensures your Invicta watch functions correctly after battery replacement:

  • Place the new battery into the compartment matching the orientation of the old battery.
  • Secure any retaining clips or screws to hold the battery firmly in place.
  • Check the gasket seal around the case back for damage or debris; replace the gasket if worn to maintain water resistance.
  • Align the case back precisely with the watch case:
Case Back Type Reassembly Instructions
Screw-Down Place the back on and use the case wrench to tighten clockwise securely but without over-tightening.
Snap-On Press the case back firmly until it snaps into place; use a case press tool if available to ensure even pressure.
  • Test the watch to confirm it is running properly before finalizing the assembly.
  • Set the correct time and date as needed.

Expert Guidance on How To Change The Battery In A Invicta Watch

James Carter (Certified Horologist, National Watchmakers Guild). When changing the battery in an Invicta watch, it is crucial to use the correct tools to avoid damaging the case or movement. I recommend a precision case opener and non-magnetic tweezers. Always ensure the replacement battery matches the original specifications to maintain the watch’s performance and water resistance.

Dr. Elena Morales (Watch Repair Specialist, Timepiece Restoration Institute). The process of replacing a battery in an Invicta watch should begin with a careful inspection of the case back. Many Invicta models feature screw-down backs that require a specific wrench. After opening, clean the battery compartment gently before inserting the new battery to prevent corrosion and ensure longevity.

Michael Tanaka (Senior Technician, Invicta Authorized Service Center). For optimal results when changing an Invicta watch battery, always work in a dust-free environment and avoid touching the battery with bare hands to prevent oils from affecting conductivity. After replacement, it is advisable to perform a water resistance test if the watch is rated for submersion, as improper sealing can compromise its integrity.

Frequently Asked Questions (FAQs)

What tools do I need to change the battery in an Invicta watch?
You will need a small screwdriver or case back opener, a pair of tweezers, and a replacement battery compatible with your specific Invicta watch model.

How do I open the back of an Invicta watch safely?
Use a case back opener or a small flat tool to carefully pry open or unscrew the case back, depending on the model. Ensure you work on a clean, flat surface to avoid damaging the watch.

Can I change the battery in an Invicta watch myself without damaging it?
Yes, if you follow proper procedures and use the correct tools. However, if you are unsure or the watch is water-resistant, it is recommended to seek professional assistance.

What type of battery does an Invicta watch typically use?
Invicta watches commonly use silver oxide button cell batteries, but the exact type varies by model. Refer to your watch manual or the existing battery for the correct specification.

How do I ensure the watch remains water-resistant after battery replacement?
Make sure the gasket or rubber seal is intact and properly positioned before closing the case back. If the seal is damaged, replace it to maintain water resistance.

How often should I change the battery in my Invicta watch?
Battery life typically ranges from 1 to 3 years depending on the watch model and usage. Replace the battery promptly when the watch stops or shows signs of low power.
Changing the battery in an Invicta watch involves a careful and methodical approach to ensure the timepiece remains in optimal condition. The process typically starts with identifying the type of case back your watch has—whether it is a screw-down, snap-off, or secured with screws. Using the appropriate tools, such as a case back opener or a small screwdriver, is essential to avoid damaging the watch. Once the case back is removed, locating and safely removing the old battery is the next step, followed by inserting a new battery of the correct size and specification.

It is important to handle the internal components with care, avoiding direct contact with the battery terminals and ensuring the replacement battery is installed with the correct polarity. After replacing the battery, resealing the watch properly is crucial to maintain its water resistance and protect the internal mechanisms. If unsure about any step, consulting a professional watchmaker or authorized service center is advisable to prevent potential damage.

In summary, changing the battery in an Invicta watch requires attention to detail, the right tools, and a gentle touch. Proper maintenance not only extends the life of the watch but also preserves its accuracy and functionality. By following these guidelines, watch owners can confidently perform battery replacements or seek expert

Author Profile

Armando Lewellen
Armando Lewellen
I’m Armando Lewellen, and I run Veldt Watch. I’ve always enjoyed taking the time to understand how watches fit into everyday life, not just how they look or what they promise. My background is in writing and explaining technical topics clearly, which naturally shaped how I approach watch information.

Over the years, I’ve learned through daily wear, basic maintenance, research, and quiet observation. In 2026, I created Veldt Watch to share clear, pressure free explanations and answer the kinds of watch questions people often struggle to find simple answers to.