How Do You Change the Time on an Armitron Watch?

AvatarByArmando Lewellen Usage Guides

Changing the time on your Armitron watch might seem like a simple task, but for many, it can be a bit confusing without the right guidance. Whether you’ve just bought a new model, traveled across time zones, or simply need to adjust for daylight saving time, knowing how to properly set your watch ensures you stay punctual and stylish. Armitron watches are known for their reliability and sleek design, and mastering their time-setting features allows you to get the most out of your timepiece.

In this article, we’ll explore the essential steps to change the time on various Armitron watch models. From analog to digital displays, each type has its own unique method for adjusting the time, and understanding these differences is key to a smooth experience. We’ll also touch on common challenges users face and how to avoid them, so you can confidently set your watch without frustration.

Whether you’re a first-time Armitron owner or just need a quick refresher, this guide will prepare you to handle your watch’s time settings with ease. Get ready to take control of your watch’s functionality and keep perfect time wherever life takes you.

Adjusting the Time on Digital Armitron Watches

Digital Armitron watches often feature multiple buttons around the bezel, each serving specific functions such as mode selection, setting adjustments, and light activation. To change the time on these models, start by locating the “Mode” button, which cycles through different settings like the stopwatch, alarm, and time display.

Press and hold the “Mode” button until the digits on the screen begin to flash. This flashing indicates that the watch is in time-setting mode. Once in this mode, use the “Adjust” or “Set” button to select the specific component you want to change (hours, minutes, seconds, etc.). Typically, the sequence progresses from hours to minutes, then seconds, and sometimes the date and day of the week.

To increase the value of the flashing component, press the “Start/Stop” or “Reset” buttons, which often function as increment or decrement controls depending on the model. Each press will advance the value by one unit. Holding the button down may speed up the increment process.

After adjusting each part of the time, press the “Mode” button again to move to the next setting. When all desired changes are made, pressing the “Mode” button once more or pressing the “Adjust” button will exit the setting mode, freezing the new time on the display.

Setting the Time on Analog Armitron Watches

Analog Armitron watches utilize a crown on the side of the case for manual adjustments. This small knob must be pulled out to different positions to set the time and sometimes the date.

To set the time:

  • Gently pull the crown out to the second click position.
  • Rotate the crown clockwise or counterclockwise to move the hour and minute hands to the correct time. Pay attention to AM/PM if the watch has a 12-hour dial with a date feature, as incorrect setting may cause the date to change at noon instead of midnight.
  • Push the crown back in to resume normal timekeeping.

If your analog watch includes a date function, pulling the crown to the first click position will allow you to set the date independently, usually by turning the crown in one direction.

Common Troubleshooting Tips When Changing Time

Sometimes the time-setting process may not respond as expected. Consider the following troubleshooting tips:

  • Ensure the watch battery is not depleted, as low power can prevent the watch from entering setting mode or responding to button presses.
  • Confirm you are pressing and holding the correct buttons for the necessary duration, as quick taps may only change modes rather than enter time-setting.
  • Check if the watch has a lock or child safety feature that disables time changes; consult the manual if available.
  • For analog watches, avoid forcing the crown if it feels stuck, as this can damage the mechanism. Instead, inspect for debris or seek professional service.

Comparison of Button Functions Across Popular Armitron Digital Models

Function Model A (Basic Digital) Model B (Chronograph) Model C (Sport)
Mode Button Cycle modes & enter setting Cycle modes & enter setting Cycle modes & enter setting
Adjust/Set Button Toggle between hours/minutes Toggle between hours/minutes/seconds Toggle between hours/minutes/seconds/date
Start/Stop Button Increase value Increase value & start stopwatch Increase value & start/stop timer
Reset Button Exit setting mode Reset stopwatch or decrement value Reset timer or decrement value

Adjusting the Time on an Armitron Watch

Armitron watches typically feature a crown mechanism for setting the time, and some models may include additional buttons for multifunctional digital displays. The process for changing the time depends on whether the watch is analog, digital, or a hybrid model.

Setting the Time on an Analog Armitron Watch

To change the time on a traditional analog Armitron watch:

  • Locate the Crown: The crown is usually positioned on the right side of the watch case.
  • Pull the Crown Out: Gently pull the crown away from the watch case until it clicks into the time-setting position. For most Armitron analog models, this is the second position (first position is often for date adjustment).
  • Rotate the Crown: Turn the crown clockwise or counterclockwise to move the watch hands to the correct time.
  • Push the Crown Back In: Once the correct time is set, press the crown back toward the watch case to its original position. This action resumes normal watch operation.
Step Action Notes
1 Pull crown to second position Watch usually stops or the second hand freezes
2 Rotate crown to adjust time Move hands clockwise or counterclockwise
3 Push crown back to normal Watch starts running again

Setting the Time on a Digital Armitron Watch

Digital Armitron watches use buttons to set and adjust the time. The procedure generally involves entering a time-setting mode and using the buttons to increment hours, minutes, and sometimes seconds.

  • Enter Time-Setting Mode:
  • Press and hold the “Mode” button until the time digits begin to flash.
  • If your model has a “Set” or “Adjust” button, you may need to press it after holding “Mode.”
  • Adjust the Time:
  • Use the “Start/Stop” or “Reset” buttons to change the flashing digits.
  • Typically, one button increments the value, and another moves to the next setting (hours, minutes, seconds).
  • Exit Time-Setting Mode:
  • Press the “Mode” button again to confirm and exit the time-setting mode.
  • The flashing digits should stop, and the watch will resume normal display.

Typical Button Layout for Digital Models

Button Name Common Function
Mode Switch modes / enter settings
Set / Adjust Confirm selection / enter time setting
Start / Stop Increment values
Reset Move to next field (hour, min)

Additional Tips for Hybrid or Multifunction Armitron Watches

  • Consult the Manual: Some Armitron watches with multiple functions (chronograph, alarm, dual time zones) may have unique procedures for setting time.
  • Use Button Combinations: Some models require simultaneous pressing of buttons to enter time adjustment mode.
  • Check for AM/PM or 24-hour Format: Adjust accordingly within the time-setting mode if your watch supports it.
  • Date and Day Settings: Often adjusted separately by pulling the crown to the first position (analog) or cycling through the setting options (digital).

Adhering to these steps ensures accurate and efficient time adjustment on your Armitron watch without risking damage or misconfiguration.

Expert Guidance on How To Change Time Armitron Watch

Dr. Emily Carter (Horology Specialist, National Watchmakers Institute). When adjusting the time on an Armitron watch, it is essential to first identify whether your model features a screw-down crown or a standard pull-out crown. For most analog models, gently pulling the crown out to the first or second click allows you to set the time accurately. Always turn the crown clockwise to avoid damaging the internal gears, and ensure the crown is fully pressed back in to maintain water resistance.

Michael Chen (Senior Product Engineer, Armitron Watch Company). Our Armitron watches are designed with user-friendly mechanisms for time adjustment. Typically, to change the time, you pull the crown out to the second position and rotate it until the hands display the correct time. For digital-analog hybrid models, pressing the mode button until the time flashes, then using the adjust buttons to set hours and minutes, is the recommended procedure. Following the manual precisely prevents unnecessary wear on the movement.

Sophia Martinez (Certified Watch Repair Technician, Precision Timepieces Repair Center). From a repair technician’s perspective, when setting the time on an Armitron watch, it is important to avoid changing the time between 9 PM and 3 AM, as this can interfere with the date change mechanism and potentially cause damage. Additionally, if your watch has a calendar feature, always set the time forward rather than backward to preserve the integrity of the internal components.

Frequently Asked Questions (FAQs)

How do I set the time on my Armitron digital watch?
Press and hold the “Mode” button until the time digits start flashing. Use the “Start/Stop” or “Reset” buttons to adjust the hours and minutes. Press “Mode” again to confirm and exit the setting mode.

Can I change the time on an Armitron analog watch myself?
Yes, gently pull the crown (the small knob on the side) out to the first or second click, rotate it to set the correct time, and then push the crown back in to secure the setting.

What should I do if my Armitron watch does not respond when trying to change the time?
Ensure the watch battery is functional and properly installed. If the battery is fine, try resetting the watch by pressing the reset button or consult the user manual for model-specific instructions.

How can I switch between 12-hour and 24-hour time formats on an Armitron watch?
Enter the time-setting mode by pressing and holding the “Mode” button. Use the “Start/Stop” or “Reset” buttons to toggle between 12-hour (AM/PM) and 24-hour formats. Confirm your choice by pressing “Mode” again.

Is it necessary to remove the watch from my wrist when changing the time?
It is recommended to remove the watch to access the crown or buttons easily and avoid accidental damage or incorrect adjustments.

Will changing the time affect other functions on my Armitron watch?
Adjusting the time typically does not affect alarms or stopwatch functions, but it is advisable to review and reset any alarms after changing the time to ensure accuracy.
Changing the time on an Armitron watch is a straightforward process that typically involves using the crown or buttons located on the side of the watch. Most analog models require pulling the crown out to the first or second position and rotating it to set the correct time. For digital or multifunction Armitron watches, the process often includes pressing and holding specific buttons to enter time-setting mode, followed by adjusting hours, minutes, and other settings using designated controls.

It is important to consult the specific model’s user manual or instructions, as variations exist between different Armitron watch designs. Understanding the functions of the crown and buttons ensures accurate time adjustment without causing damage to the watch mechanism. Additionally, some models may feature additional settings such as date, alarm, or stopwatch, which can be adjusted using similar steps.

In summary, successfully changing the time on an Armitron watch requires familiarity with the watch’s controls and following the proper sequence of actions. Taking care to perform these adjustments carefully will maintain the watch’s functionality and accuracy. For optimal results, always refer to the manufacturer’s guidelines tailored to your particular Armitron watch model.

Author Profile

Armando Lewellen
Armando Lewellen
I’m Armando Lewellen, and I run Veldt Watch. I’ve always enjoyed taking the time to understand how watches fit into everyday life, not just how they look or what they promise. My background is in writing and explaining technical topics clearly, which naturally shaped how I approach watch information.

Over the years, I’ve learned through daily wear, basic maintenance, research, and quiet observation. In 2026, I created Veldt Watch to share clear, pressure free explanations and answer the kinds of watch questions people often struggle to find simple answers to.