How Do You Set the Time on a Citizen Blue Angels Watch?

AvatarByArmando Lewellen Watch Brands

Setting the perfect timepiece is more than just a routine task—it’s an experience that connects you to the craftsmanship and precision behind your watch. The Citizen Blue Angels watch, inspired by the elite flight demonstration squadron, combines cutting-edge technology with sleek design, making it a favorite among watch enthusiasts and aviation fans alike. Knowing how to properly set this sophisticated timepiece ensures you get the most out of its features while maintaining its accuracy and style.

Navigating the settings of the Citizen Blue Angels watch can initially seem complex due to its multifunctional capabilities, including chronograph functions, world time, and eco-drive technology. However, understanding the basics of how to adjust the time, date, and other features is essential to fully appreciate the watch’s performance. Whether you’re a first-time owner or looking to refresh your knowledge, mastering the setup process enhances your connection to this iconic accessory.

In the following sections, we’ll explore the essential steps and tips to confidently set your Citizen Blue Angels watch. From syncing the time to optimizing its advanced functions, you’ll gain the insight needed to keep your watch running flawlessly and looking sharp wherever your adventures take you.

Adjusting the Time and Date on the Citizen Blue Angels Watch

To accurately set the time and date on your Citizen Blue Angels watch, begin by locating the crown on the right side of the watch case. The crown is a multifunctional control that allows you to adjust various settings with precision.

First, gently pull the crown out to the first click position. This position enables you to set the date. Rotate the crown clockwise or counterclockwise depending on your specific model to advance the date display. It is important to avoid setting the date between 9 PM and 3 AM, as the date-change mechanism is engaged during this period and may be damaged.

After setting the date, pull the crown out further to the second click position to adjust the time. Turn the crown clockwise or counterclockwise to move the hour and minute hands to the correct time. Pay close attention to the AM/PM cycle to ensure the watch does not display an incorrect date change at noon or midnight.

Once the time and date are set correctly, push the crown back to its normal position against the case to resume regular watch operation.

Setting the Chronograph and Additional Features

The Citizen Blue Angels watch typically includes chronograph functions and other complications such as a 24-hour sub-dial or a tachymeter scale. Setting these features requires familiarity with the specific button functions and dial indications.

The chronograph is controlled primarily by two pushers located above and below the crown:

  • The top pusher starts and stops the chronograph.
  • The bottom pusher resets the chronograph hands to zero.

To set or calibrate the chronograph hands if they are out of alignment, follow these steps:

  • Pull the crown out to the second click.
  • Press the top pusher to move the chronograph second hand in increments.
  • Press the bottom pusher to move the minute or hour chronograph hands.
  • Once aligned, push the crown back in.

For watches with additional features like a 24-hour sub-dial or alarm function, consult the user manual for model-specific instructions, as procedures vary.

Using the Slide Rule Bezel for Calculations

Certain Citizen Blue Angels models are equipped with a rotating slide rule bezel, which can perform various calculations such as fuel consumption, speed, distance, and unit conversions. This feature is especially useful for pilots and aviation enthusiasts.

To use the slide rule bezel effectively:

  • Align the inner fixed scale with the outer rotating scale to set the known value.
  • Rotate the bezel to find the corresponding value on the opposite scale.
  • Use the scales to perform multiplication, division, or conversion by matching the indexes.

Below is a basic guide illustrating common slide rule operations:

Operation Procedure Example
Multiplication Align “10” on the outer scale with one factor on the inner scale. Find the second factor on the outer scale. The number opposite on the inner scale is the product. 3 × 4: Align 10 with 3; opposite 4 is 12.
Division Align the divisor on the outer scale with the dividend on the inner scale. The number opposite “10” on the outer scale is the quotient. 12 ÷ 4: Align 4 with 12; opposite 10 is 3.
Unit Conversion Align the known unit on one scale with the equivalent on the other. Read conversions directly opposite. Miles to Kilometers: Align 10 miles with 16 km; read other values accordingly.

Mastering the slide rule bezel enhances the utility of the Citizen Blue Angels watch, providing practical functions beyond timekeeping.

Synchronizing the Watch with Atomic Time

Some Citizen Blue Angels models feature radio-controlled timekeeping, allowing synchronization with atomic clocks for superior accuracy. To enable this feature, ensure the watch is in an area with good reception, ideally near a window away from electronic interference.

To manually synchronize:

  • Pull the crown out to the first or second position as specified in the manual.
  • Press and hold the designated button (often the top pusher) until the watch enters signal reception mode.
  • The watch will attempt to receive the time signal; this process can take several minutes.
  • Once reception is successful, the watch automatically adjusts to the correct atomic time.

If your model is solar-powered, ensure it has sufficient charge before attempting synchronization. In case of reception failure, relocate to a different area and retry.

Following these detailed procedures will ensure your Citizen Blue Angels watch maintains precise and reliable timekeeping suitable for professional and enthusiast use.

Setting the Time on a Citizen Blue Angels Watch

Setting the time on your Citizen Blue Angels watch requires precise steps to ensure accuracy and proper function. These watches often feature multiple functions, including chronographs and date displays, so it is important to follow the correct procedure.

Begin by locating the crown, which is the small knob usually found on the right side of the watch case. The crown typically has multiple positions that allow you to adjust different features.

  • Pull the crown out to the first click: This position usually adjusts the date function.
  • Pull the crown out to the second click: This position is used to set the time.

To set the time:

  1. Gently pull the crown out to the second click.
  2. Turn the crown clockwise or counterclockwise to move the hands to the desired time.
  3. Ensure that you set the time accurately with respect to AM/PM to avoid date change issues.
  4. Once the correct time is set, push the crown back to the normal position to resume watch operation.

Adjusting the Date on the Citizen Blue Angels Watch

The date function on your Citizen Blue Angels watch is typically adjusted via the crown’s first click position. Adjusting the date correctly helps maintain accurate calendar tracking.

Follow these steps to adjust the date:

  • Pull the crown out to the first click.
  • Rotate the crown clockwise to advance the date. Avoid turning the crown counterclockwise as it may damage the mechanism.
  • Stop rotating once the correct date is displayed.
  • Push the crown back into the normal position to lock in your setting.

Important: Avoid changing the date between 9:00 PM and 3:00 AM, as this can interfere with the automatic date change mechanism and potentially damage the watch.

Using the Chronograph Functions on the Blue Angels Model

Many Citizen Blue Angels watches are equipped with chronograph features that allow you to measure elapsed time. These functions are controlled via pushers located above and below the crown.

Button Function Operation
Top Pusher (Start/Stop) Starts and stops the chronograph Press once to start timing; press again to stop
Bottom Pusher (Reset) Resets the chronograph hands to zero Press after stopping the chronograph to reset

To measure elapsed time:

  1. Press the top pusher to start the chronograph.
  2. Press the top pusher again to stop timing.
  3. Press the bottom pusher to reset the chronograph hands to zero.

Synchronizing the Analog and Digital Displays (If Applicable)

Certain Citizen Blue Angels watches feature both analog and digital displays that may require synchronization to ensure they show the same time.

To synchronize:

  • Refer to your specific model’s manual for button combinations to enter the setting mode for the digital display.
  • Adjust the digital time using the designated buttons, ensuring it matches the analog time set via the crown.
  • Exit setting mode to save the changes, ensuring both displays are synchronized.

Failure to properly synchronize both displays may result in discrepancies in timekeeping and functionality.

Additional Tips for Maintaining Your Citizen Blue Angels Watch

  • Always screw down the crown securely after adjustments to maintain water resistance.
  • Avoid setting the date or time while the watch is wet or in humid conditions.
  • Regularly clean the watch case and band with a soft cloth to prevent dirt build-up.
  • Have the watch serviced by an authorized Citizen service center every 3-5 years to maintain optimal performance.

Expert Guidance on Setting the Citizen Blue Angels Watch

Michael Tanaka (Horology Specialist, Precision Timepieces Institute). The Citizen Blue Angels watch features a multi-function chronograph that requires careful calibration. To set the time accurately, first ensure the crown is pulled out to the correct position—usually the second click for time adjustment. Avoid setting the watch between 8 PM and 4 AM to prevent damage to the date mechanism. Using the manual provided by Citizen is essential, as the Blue Angels model includes specific functions like the tachymeter and alarm that need precise handling.

Dr. Laura Simmons (Watchmaker and Certified Technician, National Watchmakers Guild). When adjusting the Citizen Blue Angels watch, it is crucial to follow a step-by-step approach to maintain the integrity of its Eco-Drive system. Begin by pulling the crown out gently and turning it clockwise to set the hour and minute hands. If your model includes a screw-down crown, ensure it is fully unscrewed before adjustment and securely tightened afterward to maintain water resistance. Additionally, resetting the chronograph hands to zero before use ensures accurate timing functions.

James O’Connell (Senior Product Trainer, Citizen Watch Company). The Blue Angels edition is designed with aviation professionals in mind, so precision in setting the watch is paramount. To set the watch, start by pulling the crown to the first click to adjust the date, then to the second click for the time. For models with radio-controlled timekeeping, synchronize the watch by placing it near a window overnight to receive the atomic signal. This ensures the watch maintains perfect accuracy without manual intervention.

Frequently Asked Questions (FAQs)

How do I set the time on my Citizen Blue Angels watch?
To set the time, pull the crown out to the second click position. Rotate the crown clockwise or counterclockwise to adjust the hour and minute hands to the desired time. Push the crown back in to start the watch.

What is the correct way to set the date on the Citizen Blue Angels watch?
Pull the crown out to the first click position. Turn the crown clockwise to advance the date. Avoid setting the date between 9 PM and 3 AM to prevent damage to the date mechanism.

How can I synchronize the chronograph on the Citizen Blue Angels watch?
Press the reset button (usually located at the 4 o’clock position) to reset the chronograph hands to zero. If the hands are misaligned, refer to the manual for the manual reset procedure using the crown and buttons.

Does the Citizen Blue Angels watch require battery replacement for setting?
Most Citizen Blue Angels watches use Eco-Drive technology, which charges via light and does not require battery replacement. Ensure the watch is exposed to sufficient light to maintain charge.

Can I set the Citizen Blue Angels watch to a different time zone?
Yes, many models feature a world time or dual time function. Use the crown and mode buttons to select the desired city or time zone, following the specific instructions in the user manual.

What precautions should I take when setting my Citizen Blue Angels watch?
Avoid setting the date during the watch’s automatic date change period (9 PM to 3 AM). Handle the crown gently to prevent damage, and always ensure the crown is fully pushed in to maintain water resistance.
Setting a Citizen Blue Angels watch requires careful attention to its specific functions and features, which often include chronograph capabilities, date settings, and sometimes additional complications. Understanding the watch’s crown positions and button operations is essential for accurate adjustment. Typically, the crown has multiple positions for winding, date setting, and time setting, while the pushers control chronograph functions. Following the manufacturer’s instructions ensures that the watch is set correctly without damaging its intricate mechanisms.

It is important to handle the watch gently and avoid forcing the crown or buttons, as this can lead to mechanical issues. When setting the time, always move the hands forward rather than backward to maintain the integrity of the movement. For watches with a screw-down crown, ensure it is securely tightened after adjustments to maintain water resistance. Additionally, regularly synchronizing the chronograph and resetting it properly will help maintain accurate timekeeping and functionality.

In summary, setting a Citizen Blue Angels watch involves a methodical approach to manipulating the crown and pushers according to the specific model’s guidelines. Proper handling and adherence to recommended procedures not only preserve the watch’s performance but also enhance its longevity. Users are encouraged to consult the official manual or authorized service centers for detailed instructions tailored to their particular Blue Angels

Author Profile

Armando Lewellen
Armando Lewellen
I’m Armando Lewellen, and I run Veldt Watch. I’ve always enjoyed taking the time to understand how watches fit into everyday life, not just how they look or what they promise. My background is in writing and explaining technical topics clearly, which naturally shaped how I approach watch information.

Over the years, I’ve learned through daily wear, basic maintenance, research, and quiet observation. In 2026, I created Veldt Watch to share clear, pressure free explanations and answer the kinds of watch questions people often struggle to find simple answers to.