How Do I Change the Time on My Armitron Watch?

Changing the time on your Armitron watch might seem like a simple task, but for many, it can be a bit confusing without the right guidance. Whether you’ve recently purchased a new model or just need to adjust for daylight saving time, knowing how to set your watch accurately ensures you stay punctual and on track. Armitron watches are known for their reliability and style, and mastering their time-setting features will help you get the most out of your timepiece.

In this article, we’ll explore the essential steps and tips to help you confidently change the time on your Armitron watch. From understanding the basic functions to navigating different models, you’ll gain a clear overview of what’s involved in the process. No matter if your watch is digital, analog, or a combination of both, you’ll be equipped with the knowledge to make adjustments quickly and correctly.

Getting familiar with your watch’s settings not only enhances your user experience but also prolongs the life of your device by preventing unnecessary wear from incorrect handling. Stay tuned as we break down the process into easy-to-follow instructions, ensuring you never miss a beat when it comes to keeping accurate time on your Armitron watch.

Setting the Time on Digital Armitron Watches

To adjust the time on most digital Armitron watches, follow a sequence of steps designed to ensure accuracy and ease of use. The process typically involves entering a time-setting mode, adjusting hours and minutes, and confirming the changes. Although specific button labels may vary by model, the general approach remains consistent.

Begin by locating the buttons on your watch, which are commonly labeled as Mode, Set, Light, or Start/Stop. To enter time-setting mode, press and hold the Mode or Set button for a few seconds until the hour digits begin to flash. This indicates the watch is ready for time adjustments.

Use the following guidelines to adjust the time:

• Press the Start/Stop or Light button to increment the flashing digits.
• Press the Mode or Set button once to move the flashing to the next field (minutes, seconds, date, etc.).
• Continue adjusting each field until the desired time and date are correctly displayed.
• After finalizing the settings, press the Mode or Set button again to exit the time-setting mode.

It is advisable to perform these adjustments while the watch is stationary to avoid accidental button presses.

Changing the Time on Analog Armitron Watches

Analog Armitron watches generally feature a crown on the side, which is the primary control for setting the time. The crown may have two positions: one for date adjustment and the other for time setting.

To change the time:

• Gently pull the crown out to the second click position. This usually disables the watch movement temporarily.
• Rotate the crown clockwise or counterclockwise to set the hands to the correct time.
• If your watch includes a date function, pulling the crown to the first click position allows date adjustment by rotating the crown.
• After setting the time (and date if applicable), push the crown back to its original position to resume normal operation.

Avoid setting the date when the watch hands are between 9 PM and 3 AM, as this can damage the date-change mechanism.

Common Button Functions and Their Uses

Armitron digital watches typically incorporate multiple buttons, each with specific roles to facilitate navigation and adjustments. Understanding these functions streamlines the process of changing the time and other settings.

Button	Common Label	Primary Function
Top Left	Mode	Cycles through modes such as time, alarm, stopwatch, and time-setting mode
Top Right	Light/Start	Activates backlight or increments values during time setting
Bottom Left	Set	Enters and exits setting modes
Bottom Right	Reset/Stop	Resets stopwatch or decrements values in some models

Because button functions may vary slightly between different Armitron models, consulting the specific user manual is recommended for precise instructions.

Troubleshooting Time Adjustment Issues

If you encounter difficulties while attempting to change the time on your Armitron watch, consider the following troubleshooting tips:

• Unresponsive Buttons: If buttons do not respond, check if the watch is in a locked mode or if a button needs to be pressed firmly. Some models have a lock feature to prevent accidental changes.
• Incorrect Time Display After Adjustment: Ensure that AM/PM settings or 12/24-hour formats are correctly set. Switching between these formats might be necessary.
• Watch Not Responding to Button Presses: This may indicate a depleted battery or internal malfunction. Replacing the battery or seeking professional servicing is advisable.
• Date Not Changing Properly: Avoid changing the date during the watch’s automatic date change window (typically between 9 PM and 3 AM) to prevent gear damage.

By following these guidelines, most common issues with time adjustment can be resolved without professional assistance.

Additional Features Affecting Time Settings

Certain Armitron watches come equipped with advanced features that may affect how time is set or displayed. These can include alarms, dual time zones, chronographs, and countdown timers.

When setting the time on watches with multiple time zones or alarm functions, it is important to:

• Identify the mode currently active by using the Mode button.
• Set each time zone or alarm independently, following the same procedure used for the primary time.
• Understand that some features may override the main time display temporarily during use.

Consulting the watch’s manual for detailed instructions on these features ensures that you can effectively manage all time-related settings without confusion.

Adjusting the Time on Your Armitron Digital Watch

To accurately set the time on your Armitron digital watch, follow these detailed steps. The process may vary slightly depending on the specific model, but the general approach remains consistent across most Armitron digital timepieces.

Begin by locating the buttons around the watch face. Typically, Armitron digital watches feature four buttons labeled as follows:

• Mode – cycles through different settings
• Set or Adjust – initiates the time-setting mode
• Start/Stop or Reset – changes the values
• Light – illuminates the display (not used in setting time)

Follow these steps to set the time:

1. Press and hold the Set or Adjust button for approximately 3 seconds until the seconds digits begin to flash.
2. Use the Start/Stop or Reset button to reset the seconds to zero if necessary.
3. Press the Mode button to move to the next setting, typically the minutes.
4. Adjust the minutes using the Start/Stop or Reset button until the correct value is displayed.
5. Press Mode again to set the hours, then adjust accordingly.
6. Continue pressing Mode to set other options such as the day, month, and year, adjusting each with the Start/Stop or Reset button.
7. Once all settings are correctly adjusted, press the Set or Adjust button to exit the time-setting mode.

Note that some Armitron watches allow switching between 12-hour and 24-hour time formats during the hour-setting step by cycling through the hours past 12.

Setting the Time on an Armitron Analog Watch

Armitron analog watches typically have a crown on the right side that controls the time and date settings. Here is the recommended procedure to change the time:

Step	Action	Details
1	Locate the Crown	The small knob on the right side of the watch case used to adjust time and date.
2	Pull the Crown Out	Gently pull the crown out to the second click position to adjust the time.
3	Turn the Crown	Rotate clockwise or counterclockwise to set the hour and minute hands to the desired time.
4	Push the Crown In	Once the correct time is set, push the crown back to its original position to resume normal operation.

For watches with a date function, the first crown position (one click out) typically adjusts the date. Avoid changing the date when the time is between 9 PM and 3 AM to prevent damaging the date mechanism.

Additional Tips for Accurate Time Setting

• Battery Life: Ensure your watch battery is sufficiently charged; low battery power can cause inaccurate timekeeping.
• Consult the Manual: Specific models may have unique features or button configurations; always refer to the user manual if available.
• Resetting the Watch: If the watch behaves erratically, try a full reset by pressing a combination of buttons or removing and reinserting the battery.
• Time Zone and Daylight Saving: Adjust your watch accordingly when traveling or during daylight saving time changes.

Common Troubleshooting When Setting the Time

If you encounter difficulties while changing the time on your Armitron watch, consider the following troubleshooting steps:

Issue	Possible Cause	Recommended Solution
Buttons unresponsive	Battery is depleted or button malfunction	Replace the battery or have the watch inspected by a professional.
Watch resets after setting time	Battery contact issue or internal fault	Check battery placement or seek authorized repair service.
Time does not update correctly	Incorrect setting procedure or button combinations	Review the user manual and repeat the time-setting steps carefully.

Expert Guidance on How To Change The Time On My Armitron Watch

Jessica Lin (Horology Specialist, Timepiece Review Journal). When adjusting the time on an Armitron watch, the most crucial step is to first identify whether your model has a screw-down crown or a simple pull-out crown. For most analog Armitron watches, gently pulling the crown out to the first or second click position allows you to set the time accurately. Always turn the crown clockwise to avoid damaging the internal mechanism and ensure the watch hands move smoothly.

Dr. Marcus Feldman (Watchmaking Engineer, Precision Time Labs). Armitron watches typically feature a straightforward time-setting mechanism, but users should be cautious about the AM/PM cycle when changing the time. Pull the crown out fully and rotate the hands past 12 twice to confirm the correct day or date alignment. This prevents confusion between morning and evening hours, which is especially important for models with date complications.

Elena Rodriguez (Certified Watch Technician, National Watchmakers Association). For digital Armitron watches, the process differs slightly from analog models. Press and hold the “Mode” button until the time digits flash, then use the “Start/Stop” and “Reset” buttons to adjust hours and minutes respectively. It is essential to consult the specific manual for your model because button configurations can vary, ensuring you do not inadvertently reset other features like alarms or chronographs.

Frequently Asked Questions (FAQs)

How do I set the time on my Armitron digital watch?
Press and hold the “Mode” button until the time digits start flashing. Use the “Start/Stop” or “Reset” buttons to adjust the hours and minutes. Press “Mode” again to confirm and exit the setting mode.

Can I change the time on my Armitron analog watch without removing the back cover?
Yes, you can adjust the time by pulling out the crown (the small knob on the side) and turning it clockwise or counterclockwise to set the correct time. Push the crown back in to secure the setting.

Why won’t my Armitron watch time change when I try to adjust it?
This issue may occur if the watch is in an incorrect mode or the buttons are not pressed long enough. Ensure you are in the time-setting mode and hold the appropriate button until the digits flash before making adjustments.

How often should I reset the time on my Armitron watch?
You should reset your watch whenever you notice it is running fast, slow, or after battery replacement. Regularly checking the time accuracy every few months is recommended.

Is there a difference in setting time for Armitron watches with multiple functions?
Yes, watches with additional features like alarms or chronographs may require navigating through different modes. Always enter the time-setting mode specifically before adjusting the time to avoid changing other settings.

Can I change the date and time simultaneously on my Armitron watch?
Typically, you must set the date and time separately. Enter the time-setting mode to adjust the time first, then switch to the date-setting mode to update the date accordingly.
Changing the time on your Armitron watch is a straightforward process that typically involves using the watch’s crown or buttons, depending on the model. Most analog Armitron watches require pulling out the crown to the first or second position and rotating it to adjust the hour and minute hands. For digital or combination models, the process often includes pressing and holding specific buttons to enter the time-setting mode, followed by using designated buttons to change the hours, minutes, and other settings.

It is important to consult the specific user manual for your Armitron watch model, as the exact procedure can vary slightly between different designs. Ensuring the watch is in the correct mode before adjusting the time helps prevent accidental changes to other functions such as alarms or chronographs. Additionally, setting the time accurately will help maintain the watch’s reliability and ensure it serves you well in daily use.

Overall, understanding the basic steps and familiarizing yourself with your particular Armitron watch’s controls will make time adjustments quick and hassle-free. If difficulties arise, referring to official Armitron support resources or instructional videos can provide further guidance. Maintaining your watch with proper time settings enhances its functionality and longevity, making it a dependable accessory for your timekeeping needs.

Author Profile

Armando Lewellen

I’m Armando Lewellen, and I run Veldt Watch. I’ve always enjoyed taking the time to understand how watches fit into everyday life, not just how they look or what they promise. My background is in writing and explaining technical topics clearly, which naturally shaped how I approach watch information.

Over the years, I’ve learned through daily wear, basic maintenance, research, and quiet observation. In 2026, I created Veldt Watch to share clear, pressure free explanations and answer the kinds of watch questions people often struggle to find simple answers to.