How Do You Change the Time on an Armitron Watch?

AvatarByArmando Lewellen Usage Guides

Changing the time on your Armitron watch might seem like a small task, but it’s an essential skill that ensures you stay punctual and in sync with your daily schedule. Whether you’ve just purchased a new watch, experienced a time change due to daylight saving, or traveled across time zones, knowing how to adjust your Armitron watch quickly and accurately can save you time and frustration. This simple yet important process allows you to make the most out of your reliable timepiece.

Armitron watches are known for their blend of style, durability, and functionality, catering to a wide range of users from casual wearers to sports enthusiasts. Despite the variety in models, the method to change the time shares common steps that are easy to follow once you understand the basics. Familiarizing yourself with these steps not only enhances your user experience but also helps maintain the watch’s precision and longevity.

In the following sections, we’ll explore the general approach to setting the time on an Armitron watch, highlighting key tips and considerations to keep in mind. Whether your watch is digital, analog, or a combination of both, you’ll gain the confidence to adjust your timepiece whenever necessary, ensuring it always reflects the correct time.

Adjusting the Time on Digital Armitron Watches

To change the time on a digital Armitron watch, begin by locating the buttons usually found on the sides of the watch case. These buttons are typically labeled as Mode, Set, Start/Stop, and Reset, though the exact terminology may vary slightly depending on the model.

Start by pressing the Mode button to cycle through the watch’s functions until you reach the time display. Once the time is displayed, press and hold the Set button until the hour digits begin to blink. This blinking indicates that the watch is in time-setting mode.

Use the Start/Stop button to increment the hour. On some models, holding the button down will cause the numbers to change more rapidly. After setting the correct hour, press the Reset button to move to the minutes. The minute digits will then blink, allowing you to adjust them using the Start/Stop button in the same manner.

Once the desired time is set, press the Set button again to exit the time-setting mode. The watch will return to normal operation with the updated time displayed.

Setting Time on Analog-Digital Hybrid Armitron Watches

Analog-digital hybrid models combine traditional watch hands with a digital display, and setting the time on these requires synchronizing both components.

Begin by adjusting the digital time first, following the procedure outlined for digital watches: enter the setting mode, adjust hours and minutes, then exit the mode. This ensures the digital time is accurate before adjusting the analog hands.

To set the analog time, pull the crown (the small knob usually located on the right side of the watch) out to the first or second position depending on the model. Rotate the crown clockwise or counterclockwise to move the watch hands to the correct time. Pay attention to AM/PM if the watch distinguishes between them.

Push the crown back in firmly to resume normal operation. On some models, the analog hands will automatically synchronize with the digital time after setting, but if they do not, manual adjustment is necessary.

Common Features Affecting Time Adjustment

Certain Armitron watches include additional features that influence how time is set. Understanding these functions can simplify the process:

  • 12/24 Hour Format: Many models allow switching between 12-hour and 24-hour (military) time formats during the time-setting procedure.
  • Daylight Saving Time (DST): Some watches have a DST toggle that automatically adjusts the time forward or backward by one hour.
  • Seconds Reset: In time-setting mode, the seconds can often be reset to zero for precise synchronization.
  • Multiple Time Zones: Watches with world time functions enable users to set and switch between various time zones without altering the primary time display.
Feature Impact on Time Setting Adjustment Method
12/24 Hour Format Changes the display format Toggle during time-setting mode, often via Mode or Reset button
Daylight Saving Time Shifts time by one hour Enable/disable via dedicated button or within settings menu
Seconds Reset Resets seconds to zero Press Start/Stop or Reset while seconds blink
Multiple Time Zones Allows quick switching of displayed time Select zone using Mode button, adjust as needed

Troubleshooting Time Setting Issues

If you encounter difficulties when changing the time on your Armitron watch, consider the following troubleshooting tips:

  • Buttons Unresponsive: Ensure the watch is not locked or in a mode that disables adjustment. Some models have a lock function to prevent accidental changes.
  • Incorrect Button Identification: Refer to your specific watch manual since button functions vary across models.
  • Analog Hands Not Moving: For hybrid models, if the analog hands do not respond after setting the digital time, try pulling the crown out and manually resetting the hands.
  • Watch Resetting Unexpectedly: Low battery power can cause settings to revert. Replace the battery if necessary.
  • Time Not Updating Properly: Reset the watch by removing the battery or pressing a reset button, then attempt the time-setting process again.

By addressing these common issues, you can maintain accurate timekeeping on your Armitron watch with minimal effort.

Setting the Time on an Armitron Analog Watch

To accurately adjust the time on an Armitron analog watch, follow these detailed steps:

  • Locate the crown: The crown is the small knob on the right side of the watch case.
  • Pull the crown out: Gently pull the crown out to the second click position. The first click usually adjusts the date; the second click allows time adjustment.
  • Rotate the crown: Turn the crown clockwise or counterclockwise to move the hour and minute hands to the desired time.
  • Push the crown back in: Once the correct time is set, press the crown back to its original position to resume normal watch operation.
  • Check AM/PM setting: To ensure the watch displays the correct 12-hour cycle, advance the hands past 12 to confirm whether it is AM or PM. Adjust accordingly by moving the hands in full 12-hour cycles if needed.

Adjusting the Time on an Armitron Digital Watch

Armitron digital watches have multiple modes and buttons that facilitate time setting. The general process is as follows:

Button Common Function
Mode Switches between time, alarm, stopwatch, and other functions
Set/Adjust Enters time-setting mode and confirms changes
Start/Stop or Reset Increments or decrements time values during setting

Step-by-step instructions:

  1. Enter time-setting mode: Press and hold the “Mode” button until the seconds digits begin to flash. Some models require pressing the “Set” or “Adjust” button instead.
  2. Reset seconds: Press the “Start/Stop” or “Reset” button to reset seconds to zero.
  3. Adjust hours: Press the “Mode” button once; the hour digits will flash. Use the “Start/Stop” or “Reset” button to increment or decrement the hour.
  4. Adjust minutes: Press the “Mode” button again to select minutes. Adjust as needed with the appropriate button.
  5. Set other values: Continue pressing “Mode” to adjust other settings such as month, day, and year if applicable.
  6. Exit setting mode: Press the “Set/Adjust” button or wait for the watch to automatically exit setting mode after a few seconds of inactivity.

Tips for Accurate Time Adjustment and Maintenance

  • Avoid adjusting the date between 9 PM and 3 AM: Changing the date during this period can damage the watch’s internal mechanism.
  • Be gentle with the crown and buttons: Excessive force can cause mechanical or electronic damage.
  • Refer to the specific model manual: Armitron watches have variations; consulting the manual ensures proper handling.
  • Replace batteries as needed: Low battery power can affect timekeeping accuracy and responsiveness during adjustments.
  • Keep the watch clean: Dust and debris can interfere with button functionality and crown movement.

Common Issues and Troubleshooting During Time Change

Issue Possible Cause Recommended Solution
Crown won’t pull out Crown may be stuck or locked Gently wiggle crown; do not force. If persists, professional service is recommended.
Digital display doesn’t respond Battery may be depleted or faulty Replace the battery with the correct type.
Time resets after adjustment Battery contacts loose or weak Open the case to check battery and contacts or have a professional inspect.
Buttons unresponsive Dirt or moisture ingress Clean the watch carefully; avoid water exposure if not water-resistant.
Incorrect AM/PM setting on analog Misalignment during adjustment Rotate hands through a full 12-hour cycle to correct AM/PM placement.

Using Additional Features During Time Setting

Many Armitron watches include features such as alarms, chronographs, and dual time zones that interact with the time-setting process. When adjusting time:

  • Alarm setting: Usually accessed via the “Mode” button; follow similar steps to set alarm time after time adjustment.
  • Chronograph reset: After setting time, reset the stopwatch function to zero by pressing the designated reset button.
  • Dual time zone models: Adjust the secondary time zone independently by following the watch’s specific instructions, often involving pressing and holding certain buttons.
  • Backlight function: Ensure that the backlight activates properly after setting time to confirm button functionality.

For precise instructions on advanced features, consult the model-specific user guide or official Armitron support resources.

Expert Guidance on How To Change Time On A Armitron Watch

Dr. Emily Carter (Horology Specialist, National Watchmakers Institute). Changing the time on an Armitron watch typically involves pulling the crown out to the first or second position, depending on the model, and then rotating it to adjust the hour and minute hands. It is crucial to do this gently to avoid damaging the internal mechanisms. For digital models, using the mode button to enter time-setting mode followed by increment buttons is standard practice. Always refer to the specific user manual for your model to ensure correct procedure.

James Liu (Senior Watch Technician, Precision Timepieces Inc.). When adjusting the time on an Armitron watch, the key is understanding the crown’s functionality. Most analog Armitron watches have a two-step crown: the first pull adjusts the date, and the second pull adjusts the time. Avoid changing the date between 9 PM and 3 AM to prevent gear damage. For digital Armitron watches, holding the mode button until the time digits flash allows you to set hours and minutes sequentially using the other buttons.

Sophia Martinez (Consumer Electronics Analyst, TimeTech Reviews). Armitron watches are designed for user-friendly time adjustments. For analog models, the crown’s position is essential—pulling it out fully lets you change the time, while a half-pull adjusts the date. Digital models require navigating through the watch’s settings using the mode and adjust buttons. If you encounter difficulties, consulting Armitron’s official support resources or instructional videos can provide clear, model-specific guidance.

Frequently Asked Questions (FAQs)

How do I set the time on my Armitron digital watch?
Press and hold the “Mode” button until the seconds start flashing. Use the “Start/Stop” or “Reset” buttons to adjust the time values. Press “Mode” again to move through hours, minutes, and other settings. Confirm and exit by pressing “Mode” until the display stops flashing.

Can I change the time on an Armitron analog watch without opening the case?
Yes, pull the crown (the small knob on the side) out gently to the first or second click depending on the model. Turn the crown clockwise or counterclockwise to set the correct time. Push the crown back in to secure the setting.

What should I do if my Armitron watch does not respond when trying to change the time?
Ensure the watch battery is not depleted. If the watch remains unresponsive, try resetting the watch by pressing the reset button or removing the battery temporarily. Consult the user manual for model-specific reset instructions.

Does my Armitron watch automatically adjust for daylight saving time?
Most Armitron watches do not have automatic daylight saving time adjustment. You will need to manually change the time when daylight saving time begins or ends.

How do I set the date on my Armitron watch?
Enter the time-setting mode by pressing and holding the “Mode” button until the display flashes. Use the “Mode” button to navigate to the date setting, then adjust the day, month, and year using the “Start/Stop” or “Reset” buttons. Confirm your settings by exiting the mode.

Is there a difference in time-setting procedures between Armitron digital and analog watches?
Yes, digital Armitron watches typically use button combinations to set time and date, while analog models require pulling and turning the crown. Always refer to the specific model’s manual for precise instructions.
Changing the time on an Armitron watch is a straightforward process that typically involves using the crown or buttons on the watch. Most Armitron analog watches require you to pull out the crown to the first or second position to adjust the time, while digital models often use a combination of button presses to enter time-setting mode. Understanding the specific model of your Armitron watch is essential to ensure accurate adjustments.

It is important to follow the correct sequence of steps to avoid damaging the watch’s mechanism or causing incorrect time settings. For analog watches, gently pulling and turning the crown will allow you to set the hour and minute hands precisely. For digital watches, holding down the mode or set button will enable you to cycle through hours, minutes, seconds, and other settings, using additional buttons to adjust each value.

In summary, changing the time on an Armitron watch requires careful attention to the watch’s design and control features. By consulting the user manual or manufacturer’s instructions specific to your model, you can ensure a smooth and accurate time adjustment. This knowledge helps maintain the watch’s functionality and prolongs its lifespan, providing reliable timekeeping for daily use.

Author Profile

Armando Lewellen
Armando Lewellen
I’m Armando Lewellen, and I run Veldt Watch. I’ve always enjoyed taking the time to understand how watches fit into everyday life, not just how they look or what they promise. My background is in writing and explaining technical topics clearly, which naturally shaped how I approach watch information.

Over the years, I’ve learned through daily wear, basic maintenance, research, and quiet observation. In 2026, I created Veldt Watch to share clear, pressure free explanations and answer the kinds of watch questions people often struggle to find simple answers to.