How Do You Change the Battery in an Invicta Watch?

AvatarByArmando Lewellen Usage Guides

Changing the battery in your Invicta watch might seem like a daunting task, but with the right guidance, it can be a straightforward and rewarding DIY project. Whether your timepiece has stopped ticking or is running slower than usual, a fresh battery can bring it back to life, ensuring you stay punctual and stylish. Understanding the basics of your watch’s battery replacement not only saves you time and money but also deepens your appreciation for the craftsmanship behind your Invicta watch.

Invicta watches are known for their durability and precision, but like all quartz timepieces, they rely on batteries to keep accurate time. Over time, these batteries naturally lose their charge and need to be replaced to maintain optimal performance. While some may prefer to take their watch to a professional, many watch enthusiasts enjoy the satisfaction of performing this simple maintenance themselves. However, it’s important to approach the process with care to avoid damaging the watch’s intricate components.

In the following sections, you’ll discover essential tips and considerations for changing the battery in an Invicta watch safely and effectively. From identifying the right tools to understanding the watch’s design features, this guide will prepare you to tackle the task confidently. Whether you’re a first-timer or looking to refine your skills, you’ll gain valuable insights

Opening the Case Back of Your Invicta Watch

To access the battery compartment, you first need to carefully open the case back of your Invicta watch. The method for opening the case back depends on the specific model, as Invicta watches commonly feature either a screw-down back or a snap-on back.

For screw-down case backs, you will require a case back opener tool or a specialized watch case wrench. These tools allow you to grip the notches on the back and unscrew it without damaging the watch. Begin by placing the watch face down on a soft cloth to prevent scratches. Align the tool with the grooves on the case back, then gently turn counterclockwise until the back loosens.

Snap-on case backs, on the other hand, can be pried open using a thin blade or a case knife. Insert the blade carefully into the small indentation or lip on the edge of the case back. Apply gentle leverage to pop the back off. Take extra caution to avoid scratching the case or injuring yourself.

In either case, work in a well-lit, clean area and keep track of any small parts or gaskets that may be present. The gasket ensures water resistance, so avoid damaging or misplacing it.

Identifying and Removing the Battery

Once the case back is removed, you will see the movement and the battery compartment. Invicta watches typically use silver oxide batteries, but the exact type varies by model.

The battery is usually held in place by a small clip or a spring mechanism. Before removing the battery, note its orientation, as incorrect placement of the new battery can prevent the watch from functioning.

To remove the battery:

  • Use plastic or non-metallic tweezers to avoid short-circuiting the battery or damaging the movement.
  • Gently lift the clip or spring holding the battery in place.
  • Carefully extract the battery without forcing it.

If you notice any dirt or corrosion, it’s advisable to clean the battery compartment with a dry, soft brush or a specialized watch cleaning tool.

Common Invicta Battery Types Battery Code Voltage Typical Lifespan
Silver Oxide SR626SW 1.55V 1-3 years
Silver Oxide SR920SW 1.55V 2-4 years
Lithium CR2016 3V 3-5 years

Installing the New Battery and Reassembling

After removing the old battery, take the new battery and verify its type and voltage to ensure compatibility. Insert the new battery in the exact orientation as the previous one, typically with the positive (+) side facing upwards. Use plastic tweezers to avoid damage.

Once the battery is securely in place and the clip or spring is restored, verify the watch is running by checking the second hand or digital display.

Before sealing the case back, inspect the gasket for any signs of wear or damage. If necessary, replace the gasket to maintain water resistance. Lightly lubricate the gasket with silicone grease to enhance the seal.

To close the case back:

  • For screw-down backs, align the threads and use the case back opener tool to screw it on clockwise, ensuring it is snug but not overtightened.
  • For snap-on backs, press firmly around the edges until you hear a click, confirming the back is securely attached.

Finally, reset the time and date as required, and your Invicta watch should be fully operational with its new battery installed.

Preparing to Replace the Battery in an Invicta Watch

Replacing the battery in an Invicta watch requires careful preparation to prevent damage to the watch’s delicate internal components. Begin by assembling the necessary tools and creating a clean, well-lit workspace. This ensures precision and minimizes the risk of losing small parts.

  • Tools Needed:
    • Watch case opener (case wrench or case knife depending on the model)
    • Plastic or wooden tweezers (to avoid short circuits)
    • Small screwdriver set (usually Phillips or flathead)
    • New battery compatible with your Invicta watch model
    • Soft cloth or watch holder
    • Magnifying glass or loupe (optional but helpful)
  • Workspace Setup:
    • Use a flat, stable surface with ample lighting
    • Lay down a soft cloth to prevent scratches
    • Organize tools and parts in a logical order

Before proceeding, verify the exact battery type by consulting the Invicta manual or examining the existing battery. Invicta watches commonly use silver oxide button cells such as SR626SW or SR920SW, but this varies by model.

Removing the Case Back of an Invicta Watch

Invicta watches typically feature one of two types of case backs: screw-down or snap-off. Identifying the type is critical to applying the correct method and avoiding damage.

Case Back Type Identification Removal Tool Removal Method
Screw-Down Multiple small indentations or grooves around the edge Case wrench or adjustable case opener Align wrench pins with indentations and turn counterclockwise
Snap-Off Seam or small lip on the edge of the back cover Case knife or thin blade Insert blade into seam and gently pry open

For screw-down backs, carefully adjust the case wrench to fit the indentations to prevent slipping. Apply steady, controlled pressure when turning. For snap-off backs, insert the case knife at the lip and twist gently to pop the back open without scratching the case.

Extracting and Replacing the Battery

Once the case back is removed, the battery is exposed but may be secured by a battery retainer clip or small screws. Follow these steps to safely remove and replace the battery:

  • Remove Battery Retainer: If present, use a small screwdriver to carefully unscrew or gently lift the retainer clip using plastic tweezers.
  • Note Battery Orientation: Observe the polarity (usually marked with + and – signs) to ensure correct replacement.
  • Remove Battery: Using plastic or wooden tweezers, carefully lift the old battery out of its compartment.
  • Insert New Battery: Place the new battery in the same orientation as the original, ensuring it sits flush in its compartment.
  • Replace Retainer: Reattach the battery retainer clip securely but avoid overtightening screws.

Handle the battery with care to avoid contamination from oils or moisture on fingers, which can reduce battery life. Use tweezers or wear latex gloves if possible.

Reassembling the Watch Case

After replacing the battery, reassemble the watch case carefully to maintain water resistance and overall integrity.

  • Inspect the Gasket: Check the rubber gasket or O-ring around the case back for any signs of damage or wear. Replace if necessary to preserve water resistance.
  • Clean the Case Back: Wipe the sealing surfaces to remove dust, dirt, or old lubricant.
  • Reattach the Case Back:
    • For screw-down backs: Align the threads and turn clockwise using the case wrench until snug. Avoid excessive force.
    • For snap-off backs: Align the case back with the watch body and press firmly until it snaps into place. Use a watch press if available for an even seal.

Ensure the case back is securely fastened to prevent moisture ingress. After reassembly, test the watch functionality by checking the movement and resetting the time if needed.

Professional Insights on Changing an Invicta Watch Battery

James Carter (Horology Specialist, Timepiece Restoration Institute). Changing the battery in an Invicta watch requires precision and care to avoid damaging the delicate internal components. It is essential to use the correct battery type specified by Invicta and to ensure the watch case is properly sealed afterward to maintain water resistance.

Dr. Emily Chen (Materials Engineer, Watchmaking Technology Lab). When replacing the battery in an Invicta watch, one must be cautious about static discharge and use appropriate tools to prevent scratching the case back. Additionally, checking the gasket condition during the battery change is crucial to preserve the watch’s durability and performance.

Michael Rodriguez (Certified Watchmaker, Luxury Timepiece Services). The key to successfully changing an Invicta watch battery lies in understanding the watch’s specific model design. Some models require specialized case openers, and improper handling can lead to misalignment or loss of waterproof integrity. Professional servicing is recommended for maintaining the watch’s longevity.

Frequently Asked Questions (FAQs)

What tools are required to change the battery in an Invicta watch?
You will need a small screwdriver or case back opener, tweezers, and a replacement battery compatible with your specific Invicta watch model.

How do I safely open the back of an Invicta watch?
Use a case back opener or a precision screwdriver to carefully pry or unscrew the back, ensuring you do not damage the gasket or the watch casing.

Can I change the battery in my Invicta watch without professional help?
Yes, if you have the proper tools and follow instructions carefully, you can replace the battery yourself; however, professional service is recommended for water-resistant models to maintain seal integrity.

What type of battery does an Invicta watch typically use?
Most Invicta watches use standard button cell batteries such as SR626SW or SR920SW, but it is essential to check the exact model for the correct battery type.

How do I ensure the Invicta watch remains water-resistant after battery replacement?
Replace the gasket if damaged, apply silicone grease to the seal, and ensure the case back is securely closed to maintain water resistance.

What should I do if the watch does not start after changing the battery?
Verify the battery is correctly installed with proper polarity, check for any loose connections, and if the problem persists, consult a professional watch technician.
Changing the battery in an Invicta watch requires careful attention to detail and the right tools to ensure the watch remains in optimal condition. The process typically involves removing the case back, safely extracting the old battery, and replacing it with a compatible new one. Proper handling is essential to avoid damaging delicate components and to maintain the watch’s water resistance.

It is important to identify the correct battery type for your specific Invicta model, as using the wrong battery can affect the watch’s performance or cause damage. Additionally, taking precautions such as working on a clean surface, using appropriate tools like a case opener and tweezers, and avoiding contact with moisture will help ensure a successful battery replacement.

For those unfamiliar with watch repair, seeking professional assistance is advisable to preserve the integrity and warranty of the timepiece. Regular battery replacement not only extends the life of your Invicta watch but also ensures accurate timekeeping and reliability. Following these guidelines will help maintain the value and functionality of your watch over time.

Author Profile

Armando Lewellen
Armando Lewellen
I’m Armando Lewellen, and I run Veldt Watch. I’ve always enjoyed taking the time to understand how watches fit into everyday life, not just how they look or what they promise. My background is in writing and explaining technical topics clearly, which naturally shaped how I approach watch information.

Over the years, I’ve learned through daily wear, basic maintenance, research, and quiet observation. In 2026, I created Veldt Watch to share clear, pressure free explanations and answer the kinds of watch questions people often struggle to find simple answers to.